ELECTRIE TRUCKS

The 18B is powered by an inline-mounted ?Super 370? high-performance motor, bolted to an aluminum motor mount with several mounting holes to fit most after-market 1:18 scale hop-up motor.

The 18B transfers all the power to the ground with its efficient shaft-drive, 4WD powertrain featuring adjustable ball differentials front and rear.

The 18B suspension absorbs all of the imperfections of the road with oil-filled shocks for smooth and consistent dampening. The four lower suspension arms are symmetrical and work with the molded upper suspension links to ensure that the 18B?s suspension geometry is optimized right out of the box.

Team Associated?s ?XP? series electronics in the 18B are completely modular, allowing easy access to the receiver, steering servo, and the ?XPS? electronic speed control with reverse.

FEATURES: Construction: Molded carbon chassis, front and rear shock towers, front and rear A-arms, chassis brace and top plate, woven carbon fiber battery strap Transmission: 2.6:1 laydown Stealth type, high-torque capacity Bearings: Full set PTFE sealed Shocks: PTFE coated oil-filled hard anodized threaded aluminum .89" and 1.18" shock bodies with unobtainium .71" and 1.02" shock shafts Dog Bones: MIP CVDs Front Tires: Pro-Line M3 Wide 4 rib Rear Tires: Pro-line M3 Holeshot Wheels: Pro-line white (dyeable) dish Caster: Fully-adjustable, caster describes the angle of the kingpin as it leans toward the rear of the vehicle Camber: Fully-adjustable, camber describes the angle at which the tire and wheel sit when viewed from the front Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes the angle of the front tires as viewed from the top Turnbuckles: Factory Team blue anodized titanium turnbuckles Front axles: Blue anodized axles which now use a bolt to retain each wheel (center drilled axles) Factory Team: Blue steel body clips, blue anodized aluminum milled motor plate, wheel spacers, ball end washers, servo mounts, wheel spacers, shock pivot balls and front hinge pin brace Lightweight differential outdrives Clear Proline buggy body with adjustable rear wing Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel Forward-swept front end design provides maximum front end ground clearance High-Torque capacity double-sided slipper provides finer adjustment Impact-resistant rear motor guard and wing mounts Adjustable battery position Servo saver: Built-in with aluminum servo saver bolt and heavy duty spring "Factory Team" sticker

REQUIRES: 2ch radio with one servo Radio Batteries: (8) AA size Pinion Gear: Motor: Stock or modified Six cell flat battery pack with standard connector AC/DC charger timed or peak for 6-cell battery Building and track equipment

Requires 8 AA batteries for radio.

Specifications:

Vehicle:
Length: 8.4" (214mm)
Width Outside Rims: 7.2" (182mm)
Weight: 1.19lbs (540g) with electrics, without body
Wheelbase: 6.1" (154mm)
Gear Ratio: 5:1
Associated RC18T 1/18 4WD RTR Electric Stadium Truck
Team Associated is proud to announce the RC18T Ready-to-Run, their first ?mini? sized, 1:18 scale vehicle. The 18T is not your typical ?toy-class? small truck? it was designed from the ground up by Team Associated?s award-winning team of engineers for competition-level performance and rugged durability far beyond the competition.
Body:
Length: 8.6" (219mm)
Width: 3.3" (83mm)
Height: 2.6" (67mm)

Requires 8 AA batteries for radio.

Specifications:

Vehicle:
Length: 8.4" (214mm)
Width Outside Rims: 7.2" (182mm)
Weight: 1.19lbs (540g) with electrics, without body
Wheelbase: 6.1" (154mm)
Gear Ratio: 5:1
Associated RC18T 1/18 4WD RTR Electric Stadium Truck
Team Associated is proud to announce the RC18T Ready-to-Run, their first ?mini? sized, 1:18 scale vehicle. The 18T is not your typical ?toy-class? small truck? it was designed from the ground up by Team Associated?s award-winning team of engineers for competition-level performance and rugged durability far beyond the competition.
Body:
Length: 8.6" (219mm)
Width: 3.3" (83mm)
Height: 2.6" (67mm)

Associated RC18T Factory Team Kit
The Factory Team RC18T unassembled kit takes the original RC18T, 4WD platform and moves it up to the next level by including all of the trick A-Team parts, making for the highest performance in a little truck.
Factory Team 18T upgrades include:

Blue Aluminum Threaded Shocks
Titanium Turnbuckles
Blue Aluminum Dogbones
Blue Aluminum Heatsink Motor Mount
Blue Graphite Battery Strap
Blue Aluminum M3 Locknuts
Carbide Steel Diff Balls

All these great upgrades are right in the box! 18T wheels, tires and clear truck body with decals and window masks are also included. Does not include motor, servo, speed controller, receiver, or battery.

The T4RS "Race-Spec" RTR features the addition of the more powerful Reedy Radon 17-turn motor, the latest LRP "AI" Automatic-setup digital speed control, and the Team Associated XP2 radio systeth. The T4RS can also be upgraded as your budget and skills allow with the full line of Factory Team T4 hop-ups

The 1:10 scale B4RS RTR is a fully assembled buggy that shares 95% of the same parts as the popular B4 Team kit.

The B4 "Race-Spec" RTR features the addition of the more powerful Reedy Radon 17-turn motor, the latest LRP "AI" Automatic-setup digital speed control, and the Team Associated XP2 radio system. The B4RS can also be upgraded as your budget and skills allow with the full line of Factory Team B4 hop-ups.

The Traxxas Bandit Off-Road Buggy RTR with Radio is an all-new Extreme Sports Buggy made for the driver who wants to go fast, have fun, and spend less money. We're not talking bare-bones beginner cars or stripped-down racers here. The Traxxas Bandit Off-Road Buggy was designed on a computer and proven on the racetrack to give you all the performance you need to blast killer rooster tails, catch major air, and suck up the big jumps

More Information About The Traxxas Bandit RTR Buggy w/ESC

The Traxxas Bandit RTR Buggy w/ESC gives you the most performance with the least maintenance. The Traxxas Bandit is packed with great features, including fully-independent suspension; rigid, fiber-composite, double-deck chassis; awesome amounts of suspension travel; adjustable slipper clutch; and adjustable, oil-filled shocks. The transmission is smooth, quiet, and reliable, with 48-pitch gears, stainless steel ball bearings, and a dependable, low-maintenance, hardened steel gear planetary differential. The Traxxas Bandit's 20-turn Stinger motor keeps the action fast and furious. Bandit is upgradeable with a full line of Traxxas hot rod parts and accessories to totally customize your ride. You can even add ball bearings to the Traxxas Bandit's bellcrank steering!

The Ready-To-Race? (RTR) Traxxas Bandit Truck includes a fully trimmed and finished five-color ProGraphix? painted body. With the Traxxas ProGraphix process, you will never see bleeding paint or over-sprays that need to be covered up with a page full of decals. Traxxas's unique ProGraphix? painting process creates crisp, clean lines, smooth fades, and amazing professional graphics. Each model is available with four different color schemes to choose from. No painting or trimming is required, so you can start running faster than ever with the Traxxas Bandit RTR Buggy w/ESC! You'll be even more satisfied knowing you got all this speed, style and handling for such an affordable price.